The M-Bus Wireless service is the software driver for an Adeunis ARF8020AA M-Bus wireless USB transceiver. On start-up this service automatically scans the gateways hardware to find an attached transceiver. On receipt of an M-Bus telegram this service will decode it and matched to an M-Bus object.
This service does not have any custom settings.
Every M-Bus Wireless service has a Raw M-Bus Telegram object added automatically. This object is not visible in the configuration page but is shown as a discovered object once the service is running. This Raw M-Bus Telegram object is updated for every received M-Bus telegram.
Only one instance of this service should be configured
The host URI (including its port) tells the service which Mobius hub to connect to. This entry is populated automatically when the service is add to the configuration and should not be modified by the user. The default is the local device.
An advanced user can use these settings if required but care must be taken to ensure that the connection is secure.
If checked this service is enabled and may be started either manually or automatically on boot. The default is checked.
Run At Start
If checked this service will start running automatically when the device boots up. For most services this should be checked. The default is checked.
All of the settings below the raw JSON switch are service dependent. They are stored on the device in the JSON format but for ease of use, most services provide a simple custom user interface for configuring the required custom settings. Advanced users may choose to directly edit the JSON. Setting the raw JSON switch to true will hide the custom user interface and show the settings in JSON format. Setting the switch back to false will once again show the custom user interface.