The Workocc IP Driver service is the software driver for an IP based Workplace Occupancy receiver. On receipt of a Workplace Occupancy telegram this service will forward the telegram to all Workocc Devices services to be decoded and matched to a Workplace Occupancy object.
Every Workocc IP Driver service has a Raw Telegram object added automatically. This object is not visible in the configuration page but is shown as a discovered object once the service is running. This Raw Telegram object is updated for every received telegram.
When using the TCP/IP version of the Workplace Occupancy receiver the IP address of the chosen gateway network interface must be set to be in the same IP range as the receiver.
More than one instance of this service is allowed
The host URI (including its port) tells the service which Mobius hub to connect to. This entry is populated automatically when the service is add to the configuration and should not be modified by the user. The default is the local device.
An advanced user can use these settings if required but care must be taken to ensure that the connection is secure.
If checked this service is enabled and may be started either manually or automatically on boot. The default is checked.
Run At Start
If checked this service will start running automatically when the device boots up. For most services this should be checked. The default is checked.
All of the settings below the raw JSON switch are service dependent. They are stored on the device in the JSON format but for ease of use, most services provide a simple custom user interface for configuring the required custom settings. Advanced users may choose to directly edit the JSON. Setting the raw JSON switch to true will hide the custom user interface and show the settings in JSON format. Setting the switch back to false will once again show the custom user interface.
The TCP/IP address as written on the side of the Workplace Occupancy TCP/IP receiver