The EnOcean Devices service is both a receiver and decoder of EnOcean telegrams from an EnOcean driver service such as the EnOcean TCM300 driver service, and a container for Mobius EnOcean objects. The EnOcean Devices service will not function correctly without an EnOcean driver service. It is not necessary to configure a link between an EnOcean driver service and the EnOcean Devices service.
This service does not have any custom settings.
It is possible to add more than one instance of an EnOcean Devices service to the configuration enabling logical grouping of EnOcean objects into rooms or floors etc.
More than one instance of this service is allowed
The host URI (including its port) tells the service which Mobius hub to connect to. This entry is populated automatically when the service is add to the configuration and should not be modified by the user. The default is the local device.
An advanced user can use these settings if required but care must be taken to ensure that the connection is secure.
If checked this service is enabled and may be started either manually or automatically on boot. The default is checked.
Run At Start
If checked this service will start running automatically when the device boots up. For most services this should be checked. The default is checked.
All of the settings below the raw JSON switch are service dependent. They are stored on the device in the JSON format but for ease of use, most services provide a simple custom user interface for configuring the required custom settings. Advanced users may choose to directly edit the JSON. Setting the raw JSON switch to true will hide the custom user interface and show the settings in JSON format. Setting the switch back to false will once again show the custom user interface.